Need Tally
for Clients?

Contact Us! Here

  Tally Auditor

License (Renewal)
  Tally Gold

License Renewal

  Tally Silver

License Renewal
  Tally Silver

New Licence
  Tally Gold

New Licence
 
Open DEMAT Account with in 24 Hrs and start investing now!
« From the Courts »
Open DEMAT Account in 24 hrs
 Inordinate delay in income tax appeal hearings
 Income Tax leviable on Tuition Fee in the Year of Rendering of Services: ITAT
 Supreme Court invoked its power under Article 142 of Constitution to validate notices issued under section 148 as notices issued under section 148A. However the same shall be subject to amended provisions of section 149.
 ITAT refuses to stay tax demand on former owner of Raw Pressery brand
 Bombay HC sets aside rejection of refund claims by GST authorities
 [Income Tax Act] Faceless Assessment Scheme does not take away right to personal hearing: Delhi High Court
 Rajasthan High Court directs GST Authority to Unblock Input Tax Credit availed in Electronic Credit Ledger
 Sebi-taxman fight over service tax dues reaches Supreme Court
 Delhi High Court Seeks Status Report from Centre for Appointments of Chairperson & Members in Adjudicating Authority Under PMLA
 Delhi High Court allows Income Tax Exemption to Charitable Society running Printing Press and uses Profit so generated for Charitable Purposes
 ITAT accepts Lease Income as Business Income as Business Investments were mostly in nature of Properties

CIT vs. Hindustan Petroleum Corporation Ltd (Supreme Court)
August, 16th 2017

S. 80-IA: Difference between 'manufacturing' and 'production' explained. The word ‘production’ has a wider connotation in comparison to ‘manufacture’. Any activity which brings a commercially new product into existence constitutes production. The process of bottling of LPG renders it capable of being marketed as a domestic kitchen fuel and, thereby, makes it a viable commercial product

The Supreme Court had to consider whether bottling of LPG, as undertaken by the assessee, is a process which amounts to ‘production’ or ‘manufacture’ for the purposes of Sections 80HH, 80-I and 80-IA of the Act?; and if so, whether the assessees are entitled to claim the benefit of deduction under the aforesaid provisions while computing their taxable income?

HELD by the Supreme Court:

(1) At the outset, it needs to be emphasised that the aforesaid provisions of the Act use both the expressions, namely, ‘manufacture’ as well as ‘production’. It also becomes clear after reading these provisions that an assessee whose process amounts to either ‘manufacture’ or ‘production’ (i.e. one of these two and not both) would become entitled to the benefits enshrined therein. It is held by this Court in Arihant Tiles and Marbles P. Ltd. (2010) 320 ITR 79 (SC) that the word ‘production’ is wider than the word ‘manufacture’. The two expressions, thus, have different connotation. Significantly, Arihant Tiles judgment decides that cutting of marble blocks into marble slabs does not amount to manufacture. At the same time, it clarifies that it would be relevant for the purpose of the Central Excise Act. When it comes to interpreting Section 80-IA of the Act (which was involved in the said case), the Court was categorical in pointing out that the aforesaid interpretation of ‘manufacture’ in the context of Central Excise Act would not apply while interpreting Section 80-IA of the Act as this provision not only covers those assessees which are involved in the process of manufacture but also those who are undertaking ‘production’ of the goods. Taking note of the judgment in Commissioner of Income Tax, Goa v. Sesa Goa Ltd. (2004) 271 ITR 331 (SC) which was rendered in the context of Section 32A of the Act and which provision also applies in respect of ‘production’, the Court reiterated the ratio in Sesa Goa Ltd. to hold that the word ‘production’ was wider than the word ‘manufacture’. On that basis, finding arrived at by the Court was that though cutting of marble blocks into marble slabs did not amount to ‘manufacture’, if there are various stages through which marble blocks are subjected to before they become polished slabs and tiles, such activity would certainly be treated as ‘production’ for the purpose of Section 80-IA of the Act.

(2) Keeping the aforesaid distinction in mind, let us take note of the process of LPG bottling that is undertaken by the assessees herein and about which there is no dispute. It has come on record that specific activities at assessees’ plant include receiving bulk LPG vapour from the oil refinery, unloading the LPG vapour, compression of the LPG vapour, loading of the LPG in liquefied form into bullets, followed by cylinder filling operations. The stages of these activities are as under:

(a)Bulk LPG is received in the bottling plant through road tankers/rail wagons;

(b) The LPG is unloaded into spheres/bullets through LPG compressors which use variable levels of pressure for suction, unloading and vapour recovery;

(c) Refilling/bottling of LPG in cylinders by compressing the same into liquid form; and

(d) Capping, fixing of seals and safety valves prior to storage and loading of filled cylinders.

(3) Thus, after the bottling activities at the assessees’ plants, LPG is stored in cylinders in liquefied form under pressure. When the cylinder valve is opened and the gas is withdrawn from the cylinder, the pressure falls and the liquid boils to return to gaseous state. This is how LPG is made suitable for domestic use by customers who will not be able to use LPG in its vapour form as produced in the oil refinery. It, therefore, becomes apparent that the LPG obtained from the refinery undergoes a complex technical process in the assessees’ plants and is clearly distinguishable from the LPG bottled in cylinders and cleared from these plants for domestic use by customers. It may be relevant to point out that keeping in view the aforesaid process, the ITAT arrived at the specific findings in support of its decision, which are as under:

(a) There is no dispute that the LPG produced in the refinery cannot be directly supplied to the consumer for domestic use because of various reasons of handling, storage and safety.

(b) LPG bottling is a highly technical and complex activity which requires precise functions of machines operated by technically expert personnel.

(c)Bottling of LPG is an essential process for rendering the product marketable and usable for the end customer.

(d)The word ‘production’ has a wider connotation in comparison to ‘manufacture’, and any activity which brings a commercially new product into existence constitutes production. The process of bottling of LPG renders it capable of being marketed as a domestic kitchen fuel and, thereby, makes it a viable commercial product.

(4) In the considered opinion of this Court, the aforesaid activity would definitely fall within the expression ‘production’. We agree with the submission of the learned counsels for the assessees that the definition of ‘manufacture of gas’ in Rule 2 (xxxii) of the Gas Cylinders Rules, 2004 also supports the case of the assessees inasmuch as gas distribution and bottling is treated as manufacturing or producing gas. We are also inclined to accept the submission of the learned counsel for the assesses that various High Courts have, from time to time, decided that bottling of gas into cylinder amounts to production and, therefore, claim of deduction under Sections 80HH, 80-I and 80-IA would be admissible. Another important aspect which was highlighted by learned counsels for the assessees was that identical issue whether bottling of gas into cylinder amounts to production for claim of deduction under the Act has been considered by various High Courts and decided in the affirmative but those decisions were not challenged by the Department. The cases specifically referred were M/s. Puttur Petro Products Pvt. Ltd. v. The Assistant Commissioner of Income Tax, Mangalore 8 (2014) 361 ITR 290 and Central U.P. Gas Ltd. v. Deputy Commissioner of Income Tax, Kanpur Income Tax Appeal No. 224 of 2014 decided by High Court of Allahabad and reported in MANU/UP/2895/2016.

(5) From the submissions made by learned counsel for the Revenue, who banked on the reasoning given by the AO, it can be gathered that the entire thrust of the AO was that the process involved in filling up the gas into cylinders does not amount to ‘manufacture’ inasmuch as the said process does not bring into existence a new identifiable and distinctive goods. In the first instance, no distinction was drawn between manufacture and production and the matter was not looked into from the angle as to whether the aforesaid process would amount to production or not. Other reason which prevailed with the AO and which was also the argument of the learned counsel for the Revenue was that, on identical facts, the Gujarat High Court had held that refilling the LPG after purchasing from M/s. HPCL into small cylinders would not amount to manufacture. That was a case which was decided in the context of the Gujarat Sales Tax Act, 1969. The Court held that transfer of LPG from bulk containers into cylinders did not amount to process of manufacture. It is pertinent to point out that Section 2(16) of the Gujarat Sales Tax Act, 1969 defines ‘manufacture’ and, therefore, the entire case was examined keeping in view the said definition of ‘manufacture’ and the issue was as to whether the process amounted to manufacture or not. As pointed out above, the question as to whether it amounts to ‘production’ as well did not arise for consideration. The AO committed manifest error in relying upon the said decision inasmuch as the provisions with which we are concerned in the instant case use the words ‘manufacture or production’ and are not limited to ‘manufacture’ alone.

(6) Judgment in the cases of Servo-Med Industries Private Limited and Tara Agencies, which were cited by the learned counsel for the Revenue, may not apply to the present case. They dealt with the provision of the Central Excise Act and, therefore, test of ‘manufacture’ propounded on that case would not be applicable when dealing with the cases under the provisions of Sections 80HH, 80-I and 80-IA of the Act which use both the expressions ‘manufacture’ and ‘production’. It has already been clarified in Vadilal Chemicals Ltd. judgment. Insofar as judgment in Tara Agencies is concerned, the factual scenario therein was totally different where three different stages in relation to tea were examined by this Court. The Court held that the procedure of blending of different qualities of tea would amount to ‘processing of tea’ and it did not amount to ‘manufacture or production of tea’. Here, the case set up by the assessees is not that bottling of LPG is ‘processing’ as distinguished from ‘manufacture’ or ‘production’. We may, at this juncture, refer to the judgment of this Court in Commissioner of Income Tax, Madras v. Vinbros and Company (2015) 14 SCC 483 where bottling and blending of alcohol is held to be ‘manufacture or production’ for the purpose of Section 80-IB of the Act.

 

Home | About Us | Terms and Conditions | Contact Us
Copyright 2024 CAinINDIA All Right Reserved.
Designed and Developed by Ritz Consulting